Advertisement
Mounting Monitor Bracket to a television with a flat back
Note: For televisions with a curved back or recessed back proceed directly to step #17.
14. Please refer to detail #8 & 8A to determine the correct size bolt your TV requires by
several try. If you are unable to find the correct bolt, consult a local hardware store.
15. Once you have determined the correct diameter Bolt, please follow the appropriate
Diagram below; Insert the selected short Bolt with Washers into the upper holes of
TV. As shown in detail #8A.
Note: Lean the TV up against a wall or other solid surface when attaching with the
Monitor Brackets (O). DO NOT place the TV face down on the glass this may cause
permanent damage.
16. Proceed to insert the selected longer Bolt with Washers and Spacer into the bottom
holes of TV as shown in detail #8. Make sure the Monitor Brackets (O) are centered
and level with each other. Tighten the bolts securing the Monitor Brackets (O) to the
TV.
Please call for replacement parts or assistance:
VAS Furniture Mfg., Inc.
Factory No. 33-10944
Page # 12
1-866-942-5362
Advertisement
