Advertisement
TIPPING RESTRAINT HARDWARE
Note: We have included one Tipping Restraint Hardware bag for this Unit.
When properly installed, this restraint can provide protection against the unexpected
tipping of the Unit due to small tremors, bumps or climbing. We strongly recommend
mounting this hardware to a wall stud and your Unit when assembling and using
your console.
Please carefully read the instructions printed on the plastic white bag.
Note: You must install the Tipping Restraint Hardware with the unit in use to prevent
any accidents or damage to the unit.
Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet,
Power Drill, and 3/8" Drill Bit.
A Touch-Up Pen has been provided to repair any small nicks or scratches that may
occur during assembly or shipping.
Your assembly should now be complete.
Thank you for your purchase.
1-866-942-5362
Please call for replacement parts or assistance:
VAS Furniture Mfg., Inc.
Factory No. 33-10944
Page # 16
Advertisement
