Syslog; Event Notifications - Avocent Cyclades ACS 6000 Installation/Administration/User Manual

50 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
2. Click Appliance Settings - Users - Authorization - Groups in the navigation bar. The Groups
screen is displayed.
3. Click on the new user group name. The Members screen is displayed.
4. In the navigation bar, click Access Rights. The Serial screen is displayed.
5. In the navigation bar, click Appliance. The Appliance Access Rights screen is displayed.
6. Select the desired appliance access rights and click Save.

Syslog

You can configure the destination of the system logged (syslog) messages. The syslog destination
can be one or more remote syslog servers, the appliance console or the root session (sends syslog
messages to all sessions where the user is root).
NOTE: If you configure both appliance console and root session as destination and then log into the console as
root, the syslog will show two messages in the console, one for destination appliance console and the other for
destination root session.
To configure syslog:
1. Click on Appliance Settings - Syslog. The Syslog screen is displayed.
2. Select Remote Server - IPv4 to enable syslog messages to be sent to one or more remote IPv4
syslog servers, and enter the IPv4 Address or Hostname. Separate multiple server addresses by
commas.
-or-
Select Remote Server - IPv6 to enable syslog messages to be sent to one or more remote IPv6
syslog servers, and enter the IPv6 Address or Hostname. Separate multiple server address by
commas.
3. Select Appliance Console to send messages to the ACS 6000 console server's console.
4. Select Root Session to send syslog messages to all sessions where you are logged in as root
user.
5. Click Save.

Event Notifications

The ACS 6000 console server will generate notifications for a wide variety of events. You can
configure the console server to direct or store those event notifications to various destinations for
immediate use or for analysis later. There are two screens available under Appliance Settings -
Event Notifications: Settings and Events.