How To Use The Freezer - Whirlpool AFG 3340 Instructions For Use Manual

Table of Contents

Advertisement

This freezer can be used to store already frozen
food and to freeze fresh food.
The freezer can operate at ambient temperatures
between +16° C and +32° C.
Switching on the freezer for the first time
There is no need to set the freezer temperature on
the thermostat because it has already been
factory-set.
Plug in the appliance.
The alarm signal will switch on, indicating that
temperature inside the freezer is not yet
sufficiently low for food storage.
Place the foodstuff inside only when the alarm is
deactivated (for more details consult the enclosed
product chart).
Temperature adjustment
For temperature adjustments, refer to the product
description sheet supplied.
Note:
The ambient air temperature, the frequency of door
opening and the position of the appliance can affect
the internal temperatures of the freezer.
These factors must be taken into account when setting
the thermostat.
Freezing
The maximum amount of fresh food that can be
frozen over a period of 24 hours is shown on the
rating plate.
To obtain the best performance from the appliance,
push the fast freeze button (until the yellow light
comes on) 24 hours before placing fresh food in the
freezer.
Food must be stored in the special freezing
compartments (see product description sheet
supplied). In appliances with more than 5
compartments, remove food from the compartment
below those used for freezing, and place the ice packs
(if supplied) in the empty compartment.
Generally, 24 hours on fast freeze is sufficient after
placing foodstuffs in the freezer; after this time,
deselect the fast freeze function.
Important:
When freezing small amounts of food, use any
compartment except the bottom drawer. To avoid
wasting energy, the fast freeze function can also not
be selected.

HOW TO USE THE FREEZER

13

Advertisement

Table of Contents
loading

Table of Contents