Assembling The Pump Body - Philips SCF304/02 User Manual

Assembling the Pump Body

Before assembling, make sure that you have correctly washed and sanitized the pump.
See section titled 'Cleaning and Sanitizing Your Pump' on page 6.
Parts you will need for this step:
Pump body
Double pumping? Assemble two pumps as shown below.
Single pumping? Assemble one pump as shown below.
9
White valve Clear silicone diaphragm
1 Insert the white valve into the pump body,
so that it fits securely into the small round
hole. Make sure the pointed side of the
valve is facing down.
2 Fit the clear silicone diaphragm into the
pump body. Ensure a perfect seal around
the rim by pressing down with your
fingers. (This is easier if assembled while
the diaphragm is wet.)
Let-down Massage Cushion Milk container
3
Screw the pump body onto the milk
container until securely in place.
To ensure that the pump
is completely stable, you
can use the stand with the
4 oz/125 ml milk container.
The Let-down Massage Cushion has petals
4
that flex in and out to gently massage the area
around the breast. This is intended to help
stimulate a fast, natural milk flow. When using
the breast pump without the Let-down Massage
Cushion, the maximum vacuum level achievable
will be higher.
Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
Assembling the Pump Body
White stand
10