1
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
A
The grille is attached to the baffle using double-sided self-adhe-
sive tape. To avoid damaging the grille, work with the speaker
on top of a blanket or similar, face up.
There are two slots in the lower part of the speaker. Insert a
screwdriver(-) into each slot and push down detach the lower
part.
Turn the speaker over and insert a screwdriver(-) between the
grille and the baffle. Taking care not to damage the baffle, push
down on the screwdriver(-) to prize the baffle and grille apart.
When reattaching the grille, use double-sided self-adhesive
B
tape in the locations shown in the diagram and press the grille
assy into place.
The grille is fixed using boss and double-sided self-adhesive
tape(The tape is in the locations indicated in the diagram be-
low). Do not use a dryer to heat the self-adhesive tape when
removing the grille.
The woofer is attached to the baffle by external screws. To de-
tach it, unfasten those screws. When attaching it, face its termi-
nal downward.
C
The tweeter is attached to the baffle by external screws. To de-
tach it, unfasten those screws.
D
E
F
2
1
2
GRILLE
LOCATIONS TO FIX DOUBLE-SIDED
SELF-ADHESIVE TAPE
PDP-S33-LR
2
3
Slot
Screwdriver(-)
Grille
Baffle
Tape
(SEH1074 x2)
Tape
(SEH1074 x2)
3
4
Down
Tape
(SEH1063)
Tape
(SEH1063)
4