Advertisement
Quick Links
Leaflet Multiport Patton ATA (SmartNode (SN) 41xx(s), 43xx und 44xx)
A. General information
The Patton Multiport-ATA (Analogue Telephone Adapter) connects analogue devices to IP-based data
networks. It is excellently suited for integrating analogue fax machines (T.38). Of course it can also
be used to integrate analogue telephones or door openers, which then establish a connection to the
NFON telephone system.
The Patton ATA converts voice traffic into data packets for transmission via your IP network. Thanks
to the international standards for voice- and data networks, the Patton ATA ensures reliable
operation.
The following Patton models are available:
» Patton SN 4112s (up to 2 analogue devices)
» Patton SN 4114 (up to 4 analogue devices)
» Patton SN 4118 (up to 8 analogue devices)
» Patton SN 4316* (up to 16 analogue devices)
» Patton SN 4324* (up to 24 analogue devices)
» Patton SN 4332* (up to 32 analogue devices)
» Patton SN 4412* (up to 12 analogue devices)
» Patton SN 4416* (up to 16 analogue devices)
» Patton SN 4424* (up to 24 analogue devices)
» Patton SN 4432* (up to 32 analogue devices)
The following connection cables are available for Patton models:
Patton SN 41xx models are connected with a standard patch cable (RJ45)
Patton SN 44xx models require a separate connection cable
You can choose between 2 "general" cable types with the following cable heads for the 12, 16 and 24
port Patton:
Patton connection cable 50 PIN TELCO on 50 PIN TELCO
Patton connection cable 50 PIN TELCO on open end
You can choose between 2 different cable types with the following cable heads for the 12 and 16
port Patton:
Patton connection cable 50 PIN TELCO on RJ45
Patton connection cable 50 PIN TELCO on RJ11
You can choose between 2 different cable types with the following cable heads for the 24 port
Patton:
Patton connection cable 50 PIN TELCO on RJ45
Patton connection cable 50 PIN TELCO on RJ11
1
Advertisement
Related Manuals for Patton SmartNode 41 Series
Summary of Contents for Patton SmartNode 41 Series
- Page 1 NFON telephone system. The Patton ATA converts voice traffic into data packets for transmission via your IP network. Thanks to the international standards for voice- and data networks, the Patton ATA ensures reliable operation.
- Page 2 NFON auto-provisioning only works with Patton devices purchased from NFON. NFON installs the respective firmware onto the devices to support this function. Multiport Patton devices are billed per activated port at device prices. You can activate and deactivate the desired number of ports via the service site. Only enabled/activated ports are billed.
- Page 3 3. After adding the device and activating the port, please add a new phone extension for the Patton ATA under “Targets / Add new target/ phone extension”. There, please select the MAC address +...
- Page 4 5. Then connect the Patton ATA to your network using the respective connection cable. 6. Now as a last step, connect the mains unit / power supply to the Patton ATA. *) FXS (Foreign Exchange Station) is an interface used to connect analogue devices (also referred to as “POTS”:Plain Old Telephone Service).