Packing List Camera Introduction Installing Battery Power Port Built-in Mic Lens SYNC Button PIR Detector Power Cable ×1 Camera ×1 QSG ×1 LED Indicator Photosensor Built-in Speaker Quick Start Guide Note: Press the SYNC button to pair with the base station. Press and hold the SYNC button for 8 s to reset the camera.
Installing Camera Pairing with the base station Safety Instructions Note: Make sure the mounting surface is strong enough to hold at least Step 1 Step 3 three times of the device weight. On the base station: Press the SYNC button, and then the indicator on The pairing starts, and the indicators flash as described below: - Do not short circuit the battery with other metal.
Need help?
Do you have a question about the LOOC and is the answer not in the manual?
Questions and answers