Advertisement
Quick Links
Quick Start Guide
Version 1.0.1
×1
×1
×1
Bracket×1
×1
Pry Bar×1
×1
Cable Clip Package×1
Introduction
PIR Detector
Spotlight
Micro SD Card Slot
Reset/WPS Button
Note:
The top cap can be opened with the pry bar from the accessory kit.
Press the Reset/WPS Button to enable WPS.
Press the Reset/WPS Button for 10 seconds to reset the device.
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Red light on
Booting
Device malfunction
Green light flashing
Waiting for network
Green light on
Operating properly
Red light flashing
Network connection failed
Light off
Powered off/LED turned off
Rebooting after reset
Green and Red light
Firmware updating
flashing alternately
Advertisement
Related Manuals for IMOU LOOC
Summary of Contents for IMOU LOOC
- Page 1 Introduction Micro SD Card Slot Reset/WPS Button ×1 ×1 ×1 Quick Start Guide Note: The top cap can be opened with the pry bar from the accessory kit. Press the Reset/WPS Button to enable WPS. Press the Reset/WPS Button for 10 seconds to reset the device. PIR Detector Version 1.0.1 The pattern of the LED indicator is included in the following table.
- Page 2 Connect your smartphone to your Wi-Fi network, and then scan the QR Follow the steps below to add device. Bracket code on the packing box to download and install the Imou App. This quick start guide is for reference only. Minor difference might be found in user interface.