Philips HP4824/03 User Manual page 7

This appliance is equipped with an overheat protection device. If the
,
appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance back on, check the grilles to make sure they are not
blocked by fluff, hair, etc.
Always switch off the appliance before you put it down, even if it is
,
only for a moment.
Always unplug the appliance after use.
,
Do not wind the mains cord round the appliance.
,
Never use any accessories or parts from other manufacturers or
,
that have not been specifically advised by Philips.
Do not insert metal objects into the air grilles in order to avoid
,
electric shock.
Noise level: Lc = 81 dB[A]
,
electromagnetic fields (eMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and in accordance with
the instructions in this instruction manual, the appliance is safe to use
according to scientific evidence available today.
using the appliance
1 Put the plug in the wall socket.
2 Select the desired speed to switch on the appliance: (Fig. 2)
- II: Turbo airflow for fast drying
- I: Gentle airflow especially intended for styling
- O: Off
To dry your hair, make brushing movements with the dryer at a small
,
distance from your hair.
styling
The concentrator enables you to direct the airflow at the brush or comb
with which you style your hair.
1 To connect the concentrator, simply snap it onto the appliance.
2 To disconnect the concentrator, pull it off the appliance (Fig. ).
EnglisH
7