Replacing The Light Bulb; Transportation And Changing Of Installation Position; Repositioning The Door - Nordmende RET340R Instruction Booklet

Replacing The Light Bulb

PART- 5.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old installation position, all the moving objects
(ie,shelves,crisper...) should be taken out or fixed with bands in order to prevent the
shake.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
When replacing the light of the refrigerator compartment;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top, and
remove the light cover.
3. Change the present light bulb with a new one of not more
than 15 W.
4. Replace the light cover and after waiting 5 minutes plug
the unit.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
EN - 10 -