MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737
OPTICAL
ENGINE
OPTICAL ENGINE ASSEMBLY REMOVAL
1) Remove 3 screws (A) from the Optical Engine.
2) Disconnect all cables to the Optical Engine Assembly.
3) Slide the Optical Engine assembly out of the cabinet.
DUCT ASSEMBLY REMOVAL
Upper Duct Assembly Removal Procedure
1) Loosen two screws (A) and remove the Lamp Cartridge.
2) Disconnect the Exhaust and Sirocco Fan Connectors (J4
and J8) from the back of the Engine and loosen the wiring
harnesses from the looms, refer to previous page for
connector locations.
3) Remove screw (B) from the top of the upper duct and
release the latches shown in Figure 2.
4) Remove the Upper Duct assembly from the Optical
Engine.
WD-65837 / WD-73837 / WD-82837
OPTICAL ENGINE REPLACEMENT
CD
LAMP
DOOR
J12
SWITCH
DVI
PE2
POWER
Page 11
LAMP
CARTRIDGE
A
LAMP
CARTRIDGE
A
Figure 1: Duct Assembly (Rear View)
CJ1
CJ3
BALLAST
LAMP
POWER
CONTROL
BALLAST
UPPER
DUCT
BALLAST
LOWER
DUCT