Philips HX2575/02 User Manual page 7

Directions for use
Mounting the appliance on the wall
C
1
Do not allow the charging unit to come into
contact with water.The toothbrush, however, is
watertight and can therefore be used safely
anywhere.
To mount the charger to the wall, you will need 2
wood screws (3,5 x 25 mm) and two wall plugs
1
(S5).They are available in any home centre.
2
Charging
1
The charging unit can be connected to mains voltages
between 100 and 240 Volts (alternating current) (only
type HX 2575).
C
1
- The toothbrush can be put back in the charging
unit after use.
3 hrs
If the battery in the toothbrush is being charged,
the pilot light is green and blinks. If the battery has
been fully charged, the pilot light is burns
continuously.
If the battery is almost empty, the pilot light is red and
blinks for 10 seconds after the toothbrush has been
switched off.
Mount the charging unit to the wall.
Charge the appliance for 6 hours (NiMH
version) or 3 hours (NiCd version) before
you use it for the first time.
ENGLISH
9