Transferring Data; Maintenance; Changing Battery - Delta GD40 Owner's Manual

Appendix

Transferring Data

There is one type of connection (either USB/RS-232 or Bluetooth)
to transfer results, please check your device box for the
transmission method of your device.
1. Data Transmission Via USB/RS-232 Cable ( GD40 DELTA
model only)
i. Install the software on your computer
Download Health Care System Software and instruction
manual provided on ForaCare Suisse AG, website:
http://www.foracare.ch to your computer. Follow the
instructions to install the software on your computer.
ii. Connect the device with your computer using a USB/
RS-232 cable
"PC" will appear on the display, indicating that the device is
ready to transmit data. (t)
iii. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
Data transmitted will include results with date and time.
Remove the cable and the device will automatically turn off.
Note:
• When the device is connected to the PC, it is unable to perform any
blood glucose or β-Ketone test.

Maintenance

Changing Battery

When the battery is low, the "
To change the batteries, do the following:
1. Press the edge of the battery cover and lift it up to remove the
cover.
2. Remove the old batteries and replace with two 1.5V AA size
alkaline batteries.
3. Close the battery cover.
When you will hear a "beep" sound, this indicates the batteries
are inserted correctly.
EN-10
" icon appears with E-b. (u)