Getting Started; Initial Setup - Delta GD40 Owner's Manual

Getting Started

Initial Setup

Before using the device for the first time or after you changed the batteries, do the following initial setup:
Step 1: Enter the Setting Mode
Open the battery cover and press SET. The display turns on.
Step 2: Configuring the Settings (Date, Time Format, Time, Universal Tone, Memory Deletion)
Press MAIN repeatedly to adjust the value or enable/disable the setting. Then press SET to confirm the setting and switch to another
field.
Set [Year] Set [Month] Set [Day] Set [Time Format] Set [Hour] Set [Minute] Set [Beep On,
Universal Tone,
Beep Off ]
Note:
• You may set up Beep On, Universal Tone On and Beep Off by press M to change it. (v)
• When Universal Tone is turned on, the meter guides you through the blood glucose test using
beep tones; it also outputs the result as a series of beeps.
• During memory deletion, select no to keep all saved results.
• If the device is idle for 3 minutes during the setting mode, it will turn off automatically.
Delete Memory
Records
EN-4