GLIDEAWAY EDISON Owner's Manual
Hide thumbs Also See for EDISON:

Advertisement

motion
EDISON
OWNERS MANUAL
REV 08.06.19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDISON and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GLIDEAWAY EDISON

  • Page 1 EDISON OWNERS MANUAL REV 08.06.19...
  • Page 2: Table Of Contents

    OWNERS MANUAL: EDISON Contents Safety Information What Is Included Assembly – Base Location of Controls – Remote Operation – Main Operation – Linking the Remote Troubleshooting Available Accessories Online Resources User Info Please take a moment and write down the serial number in the space provided below, in case you need to refer to it in the future.
  • Page 3: Safety Information

    OWNERS MANUAL: EDISON Safety Information DANGER! OPEN BOX IN DO NOT OPEN FROM FLAT POSITION VERTICAL POSITION. THIS CAN DAMAGE BASE. ATTENTION! IMPORTANT SAFETY INSTRUCTIONS. SAVE THIS MANUAL! PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. PROPER OPERATION OF YOUR ADJUSTABLE BED IS NECESSARY TO ENSURE THE LONG LIFE AND DURABILITY YOU EXPECT FROM A HIGH-QUALITY PRODUCT.
  • Page 4 OWNERS MANUAL: EDISON Safety Information WARRANTY WARNING! This bed is specifically designed to require no maintenance by you, the user. Any opening or tampering with the control box, motors or hand controls (with the exception of the battery compartment, if equipped) will void the warranty.
  • Page 5 OWNERS MANUAL: EDISON Safety Information SMALL CHILDREN AND PETS WARNING Immediately dispose of all packing materials, as they can pose a smothering risk to small children and pets. Injury could also occur if children or pets are permitted to play on or under the bed. Do not allow children to operate this bed without adult supervision.
  • Page 6: What Is Included

    OWNERS MANUAL: EDISON What’s Included Before discarding any packing materials, check the adjustable base shipping carton and verify the following items are included: (2) Base Pieces (1) Power Supply (1) Remote Control (not attached to the base) (4) 15” Legs...
  • Page 7: Assembly - Base

    OWNERS MANUAL: EDISON Assembly – Base It is HIGHLY recommended to use two people for the installation of this product. To assemble, please perform the following steps: Carefully lift both Base Pieces from the shipping carton, keeping the unit’s topside down. Remove the plastic wrapping from the bottom to access the bases.
  • Page 8 OWNERS MANUAL: EDISON Assembly – Base (cont’d) Please Refer to diagram when assembling the adjustable bed. Head Motor FIGURE NOTE: Make sure wire connected to Power Supply is routed UNDER Power the main metal Supply frame and lifting mechanism. Routing wires on...
  • Page 9 OWNERS MANUAL: EDISON Assembly – Base (cont’d) Connect the Foot motor connector cable to control box. REFER TO FIGURE A ON PAGE 8. NOTE: The Head and Foot motors are labeled per illustration. Insert the AC cord into the power supply.
  • Page 10 OWNERS MANUAL: EDISON Assembly – Base (cont’d) Insert the Mattress Retainer Bar upright as shown. Lift the battery cover and insert the two AAA size batteries (included) into the remote as shown in the figure. Replace the battery cover. Remote is already linked with the base.
  • Page 11 OWNERS MANUAL: EDISON Assembly – Base (cont’d) Insert AC plug into an AC outlet having 100-240V AC, 50/60Hz. Avoid outlets that work only with light switch. Initial use of base requires additional run time. Simply press the Head Up button on the remote until the head section begins to lift.
  • Page 12: Location Of Controls - Remote

    OWNERS MANUAL: EDISON Location of Controls — Remote Head Up Foot Down Foot Up Head Down Underbed Light Memory Position A Zero Gravity Anti Snore Position Position Operation — Main Press and hold the Head Up button to raise the Head position.
  • Page 13 OWNERS MANUAL: EDISON Operation — Main (cont’d) Press and hold the Foot Down button to lower the Foot position. Release button when desired position is reached. Adjust head and/or foot section(s) to desired positions. Press and hold Memory A button until the backlight on remote flashes.
  • Page 14: Operation - Linking The Remote

    OWNERS MANUAL: EDISON Operation – Linking the Remote Connecting 1 Remote to 1 Base Double click the PAIR button on the control box (light will turn blue). Simultaneously press & hold the HEAD UP and HEAD DOWN buttons. When the LED light on the control box turns green, release the two buttons.
  • Page 15: Troubleshooting

    OWNERS MANUAL: EDISON Troubleshooting In the event the base fails to operate, investigate the symptoms and possible solutions provided below: Remote control illuminates Unplug power cord, wait 30 seconds and plug in to reset electronic ■ ■ and appears to be operable, components.
  • Page 16: Available Accessories

    OWNERS MANUAL: EDISON Available Accessories Item Part Number High Profile Legs CB12LEG18.5 (Overall Bed Height 18.5”) Headboard Bracket Kit CB18HBBRKT To order an accessory, please call 1-855-581-3095 Resources CUSTOMER SERVICE VISIT US ONLINE 1-855-581-3095 glideaway.com...
  • Page 17 EDISON Sleep Well. Live Better. Be Your Best. 8226 LACKLAND RD. ST. LOUIS, MO 63114 | GLIDEAWAY.COM | 314.426.3999...

Table of Contents