Philips HP6409/45 User Manual page 11

3 Push the shaving head in the direction of the arrow (1) and remove
it from the appliance (). (Fig. 4)
4 Remove the shaving foil from the shaving head (Fig. 5).
5 Clean the shaving foil, the cutter block and the hair chamber with
the cleaning brush.
Do not exert any pressure on the shaving foil to avoid damage.
6 You can also rinse the shaving head and its parts under the
running tap.
7 Put the protection cap on the shaving head after use.
8 Rub a drop of sewing machine oil onto the shaving foil twice a year.
replacement
If you use the appliance two or more times a week, we advise you to
replace the shaving foil and the cutter block every 1 to 2 years.
A worn or damaged shaving foil may only be replaced with an original
Philips shaving foil (type no. HP6116).
A worn or damaged cutter block may only be replaced with an original
Philips cutter block (type no. HP2911).
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 26).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
EnglisH
11