Philips HP6409/45 User Manual page 10

EnglisH
10
Cleaning the attachments
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).
3 Remove the attachment (efficiency cap or massage attachment)
from the epilating head (Fig. 0).
4 Remove loose hairs with the cleaning brush.
5 Rinse the attachment under the tap while turning it.
6 Dry the attachment before you use or store it.
Cleaning the epilating head
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).
3 Push the epilating head in the direction of the arrow (1) and
remove it from the appliance () (Fig. 1).
4 Remove loose hairs with the cleaning brush (Fig. 1).
5 Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. ).
6 Shake the epilating head firmly and dry it thoroughly with a tea
towel (Fig. 3).
Note: Make sure the epilating head is completely dry before you place it
back onto the appliance.
Cleaning the shaving head
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).