Download Print this page
Hans Grohe Verso 220 Showerpipe 27237009 Instructions For Use/Assembly Instructions
Hans Grohe Verso 220 Showerpipe 27237009 Instructions For Use/Assembly Instructions

Hans Grohe Verso 220 Showerpipe 27237009 Instructions For Use/Assembly Instructions

Advertisement

Quick Links

EN Instructions for use / assembly instructions
DE Gebrauchsanleitung / Montageanleitung
2
3
Verso 220 Showerpipe
27237009

Advertisement

loading
Need help?

Need help?

Do you have a question about the Verso 220 Showerpipe 27237009 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hans Grohe Verso 220 Showerpipe 27237009

  • Page 1 EN Instructions for use / assembly instructions DE Gebrauchsanleitung / Montageanleitung Verso 220 Showerpipe 27237009...
  • Page 2: Symbol Description

    English Safety Notes Technical Data Gloves should be worn during installation to prevent crushing and cutting Operating pressure: max. 1 MPa injuries. Recommended operating pressure: 0,1 - 0,5 MPa Test pressure: 1,6 MPa The arm of the shower head is intended only to hold the shower head. Do not (1 MPa = 10 bar = 147 PSI) load it down with other objects! Hot water temperature: max. 70°C The product may only be used for bathing, hygienic and body cleaning pur- Recommended hot water temp.: 65°C poses. Connections G 1/2: cold right - hot left Children as well as adults with physical, mental and/or sensoric impairments Centre distance: 150 ±12 mm must not use this product without proper supervision. Persons under the influ- Thermal disinfection: max. 70°C / 4 min ence of alcohol or drugs are prohibited from using this product. Safety against backflow Do not allow the streams of the shower touch sensitive body parts (such as your The product is exclusively designed for drinking water! eyes). An adequate distance must be kept between the shower and you. The product may not be used as a holding handle. A separate handle must be Symbol description installed. Do not use silicone containing acetic acid! The hot and cold supplies must be of equal pressures.
  • Page 3: Montage

    Deutsch Sicherheitshinweise Technische Daten Bei der Montage müssen zur Vermeidung von Quetsch- und Schnittverletzungen Betriebsdruck: max. 1 MPa Handschuhe getragen werden. Empfohlener Betriebsdruck: 0,1 - 0,5 MPa Prüfdruck: 1,6 MPa Der Kopfbrausearm ist nur für das Halten der Kopfbrause ausgelegt, er darf (1 MPa = 10 bar = 147 PSI) nicht mit weiteren Gegenständen belastet werden! Heißwassertemperatur: max. 70°C Das Produkt darf nur zu Bade-, Hygiene- und Körperreinigungszwecken einge- Empfohlene Heißwassertemperatur: 65°C setzt werden. Anschlüsse G 1/2: kalt rechts - warm links Kinder, sowie Erwachsene mit körperlichen, geistigen und / oder sensorischen Anschlussmaße: 150 ±12 mm Einschränkungen dürfen das Produkt nicht unbeaufsichtigt benutzen. Perso- Thermische Desinfektion: max. 70°C / 4 min nen, die unter Alkohol- oder Drogeneinfluss stehen, dürfen das Produkt nicht Eigensicher gegen Rückfließen benutzen. Das Produkt ist ausschließlich für Trinkwasser konzipiert! Der Kontakt der Brausestrahlen mit empfindlichen Körperstellen (z. B. Augen) muss vermieden werden. Es muss ein ausreichender Abstand zwischen Brause Symbolerklärung und Körper eingehalten werden. Kein essigsäurehaltiges Silikon verwenden! Das Produkt darf nicht als Haltegriff benutzt werden. Es muss ein separater Haltegriff montiert werden. Safety Function (siehe Seite 6) Große Druckunterschiede zwischen den Kalt- und Warmwasseranschlüssen Dank der Safety Function lässt sich die gewünschte Höchsttemperatur...
  • Page 4 Silicone X + 36 mm 36 mm max. 39 mm max. 5 mm SW 24 mm...
  • Page 5 Ø 6 mm N m ( 1 7 click SW 6 mm (4 Nm) SW 17 mm (10 Nm) SW 2 mm (1 Nm)
  • Page 6 z. B. 42°C for example 42°C SW 3mm SW 3mm (1 Nm)
  • Page 7 Massage Shampoo Normal Rain open / öffnen open / öffnen close / schließen > 40° C hot / warm cold / kalt...
  • Page 8 www.hansgrohe.com/ www.hansgrohe.com/ www.hansgrohe.com/ www.hansgrohe.com/ cleaning-recommendation cleaning-recommendation cleaning-recommendation cleaning-recommendation EN Cleaning recommendation / Warranty / Contact DE Reinigungsempfehlung / Garantie / Kontakt #94246000 SW 2 mm SW 17 mm #26478001 SW 17 mm SW 2 mm (10 Nm) (1 Nm) > 1 min...
  • Page 9 #95794000 SW 5 mm SW 5 mm (2 Nm) > 1 min...
  • Page 10 Wartung Wartung SW 10 mm SW 30 mm SW 6 mm red ⁄ rot SW 30 mm (17 Nm) SW 6 mm (2 Nm) SW 10 mm (20 Nm)
  • Page 11 SW 6 mm...
  • Page 12 4 6 0 3 5 3 Ø 41 2 9 3 ± 12 Ø 15 0 Ø 6 8 G 1 / 2 3 0 5 10 4 0,60 0,55 0,50 0,45 0,40 0,35 0,30 0,25 0,20 0,15 0,10 0,05 0,00 Q = l/min 9 12 15 18 21 24 27 30...
  • Page 13 94246000 98942000 95401000 98941000 97536000 26478001 97606000 95163000 96179000 98419000 (7x2) 95795000 95365000 98163000 (15x2) 98466000 28537000 95160000 94140000 95659000 92200000 96467000 96429000 (9 l/min) 92199000 94246000 96737000 98131000 95843000 (15x2,5) 96157000 98390000 96922000 98382000 (26x1,5) 98913000 (12x2,25) 98282000 93136000 98913000 98129000 95927000...
  • Page 16 Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com...