Champion Professional 5000 Owner's Manual page 11

5. Install the restrictor to the front of the body as follows:
a. Slide the cone end (back) of the restrictor over the front of the body.
b. Align the large groove (top) of the restrictor to the tab on the front of the body (tab is
located 90 degrees clockwise from the feeding tube looking from the front). Apply light
pressure and rotate slowly back and forth until the restrictor slides into the insert's front
opening.
c. Rotate the restrictor counter-clockwise until it stops.
I. Use the juicing restrictor (gray) for all juicing and most homogenizing operations.
II. Use the open restrictor (almond) for some homogenizing operations and for
shredding.
Assembly Instructions
9