Making Pickup Settings (Gk Setting); Specifying The Pickup Type - Boss SY-1000 Owner's Manual

OUTPUT SELECT Explanation
Choose this setting if the SY-1000 is
COMBO AMP 1
connected to the guitar input jack of a
INPUT combo type amp (with amp and speaker in a
single unit) equipped with one speaker.
Choose this setting if the SY-1000 is
COMBO AMP 2 connected to the RETURN jack of a combo
RETURN
type amp (with amp and speaker in a single
unit) equipped with two speakers.
Choose this setting if the SY-1000 is
COMBO AMP 2 connected to the guitar input jack of a
INPUT combo type amp (with amp and speaker in a
single unit) equipped with two speakers.
STACK AMP Set this when connecting to the RETURN jack
RETURN on a stack-type amp.
STACK AMP Set this when connecting to the guitar input
INPUT
jack on a stack-type amp.
BASS AMP WITH Use this setting when connecting to a
TWEETER
tweeter-equipped bass amp.
Use this setting when connecting to a bass
BASS AMP NO
amp that has no tweeter. The high-frequency
TWEETER
range is adjusted.
6.
Press the [EXIT] button.
You'll be returned to the Play screen.

Making Pickup Settings (GK SETTING)

Make settings for the divided pickup in order to ensure that you'll
always be playing the SY-1000 in the optimal state.
The SY-1000 can save ten types of these settings (GK SETTING).
Here we explain the example of saving pickup settings in SETTING:
[1].
MEMO
The GK SETTING is saved even when the power is turned off. You
don't need to make this setting again each time you perform.
1.
Press the [SYSTEM] button.
2.
Use the [K] [J] (PAGE) buttons to access the "IN/
OUT SETTING" icon.
3.
Press the [2] knob.
The IN/OUT SETTING screen appears.
4.
Press the [1] knob.
The GK SETTING screen appears.
5.
Turn the [1] knob to select SETTING: [1].
The pickup settings will be saved in SETTING: [1].
MEMO
Pickup settings are automatically saved in the number (SETTING:
[1]–[10]) that you selected in step 5.

Specifying the Pickup Type

Choose the type of pickup that's installed on your guitar (bass).
6.
If using guitar mode, turn the [5] knob.
If using bass mode, turn the [4] knob.
Getting Ready
7