Alarm.Com ADC-V522IR Installation Manual page 3

5. Select the camera from the video device list or type in its MAC address to begin adding the camera. The camera's
MAC address is located on the back of the camera.
6. Follow the on-screen instructions to finish adding the camera. Once the camera is added, camera settings can be
configured using the Customer Website.
7. Power the camera off, and install it in its final location using the included hardware.
LED reference guide
Camera status
LED color
Wireless enrollment
LED color
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Indoor_Fixed_w%2F%2FIR_ADC-V522IR/Indoor_Fixed_w%
Status
Internet Connection
Local network connection
No network connect
System booting
Status
WPS Mode
Description
Local network and internet
connection
Local network connection only, no
internet
No local network or internet
connection
Camera is booting
Description
To enter WPS mode, push the WPS
button and release when flashing
blue (about three seconds). To add
the camera to the user's router and
account using WPS, see
mode.
Updated: Fri, 21 Sep 2018 18:29:15 GMT
WPS
3