Introductions; Preparation - JVC KD-BT1 Manual

Preparation

Cancel the display demonstration and set the clock
• See also pages 35 and 36.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information and pattern
~
Turn on the power.
Ÿ
Enter the PSM settings.
! ⁄
]
Cancel the display demonstrations
Select "Demo," then "Off."
Set the clock
Select "Clock Hr" (hour), then adjust the hour.
Select "Clock Min" (minute), then adjust the minute.
Select "24H/12H," then "24Hours" or "12Hours."
@
Finish the procedure.
Changing the display information and pattern
Ex.: When tuner is selected as the source
Source operation display
6

INTRODUCTIONS

Audio level meter display
(see "LevelMeter" on page 36)