Battery Replacement - Ricoh RZ-770 Owner's Manual

Battery Replacement

1. Open the back cover.
2. Remove the screw from the databack battery compartment cover with a small (+) screwdriver. (Fig. 36)
* Use a pointed instrument to slide the battery in the direction of the arrow to the dotted line position, to push it
out. (Fig.37)
3. Load the new battery with the side marked (+) facing upwards. Then, close the battery compartment cover using
the (+) screwdriver. (Use lithium battery CR2025. The service life is about 3 years.)
* When the battery is exhausted, the imprinted digits become faint. At that time, replace the battery.
* Do not open the date battery compartment lid except when replacing the battery
* Keep the battery out of reach of children. If a child swallows the battery, contact your doctor immediately.
Notes the date imprinting feature
* At temperatures of below 0°C (32°F), the battery performance deteriorates. The date imprinting feature may not
function correctly and imprinting may become impossible.
* When the battery is replaced, the display panel sometimes displays the wrong digits. Reset the degits for correct
indication.
* The date is sometimes illegible if it is imprinted on the following objects.
(1)"Warm"-colored objects, such as red, yellow, orange, etc.
(2) 0bjects with details similar in size to the imprinted date (gravel, leaves, etc.)
(3) Bright objects such as the sky, a white wall, etc. * Imprinting is not possible during the following modes.
(1 ) Print off mode