Freeze Mode And Cineloop - IMV EXAPad Instruction Manual

9. Freeze Mode and Cineloop

Freeze mode is available in all imaging modes.
Freeze
Menu
Freeze: Freeze and unfreeze the live ultrasound image
1
ExaPad: Indicates that the image is Frozen
2
9.1 Cineloop
The length of the sequence depends on the imaging mode and on
the frame rate.
plays cineloop sequence
plays cineloop sequence
plays cineloop sequence
pause cineloop sequence
pause cineloop sequence
plays cineloop sequence
plays cineloop sequence
pause cineloop sequence
plays cineloop sequence
pause cineloop sequence
pause cineloop sequence
previous image in sequence
pause cineloop sequence
previous image in sequence
previous image in sequence
previous image in sequence
previous image in sequence
next image in sequence
previous image in sequence
next image in sequence
next image in sequence
next image in sequence
use to scroll through the sequence of images
next image in sequence
use to scroll through the sequence of images
next image in sequence
use to scroll through the sequence of images
use to scroll through the sequence of images
use to scroll through the sequence of images
It is possible to select the start and the end of the cineloop that should be saved.
It is possible to select the start and the end of the cineloop that should be saved.
Double-click on the red marker (that will be surrounded by a blue line), move the red curser until the
It is possible to select the start and the end of the cineloop that
It is possible to select the start and the end of the cineloop that should be saved.
Double-click on the red marker (that will be surrounded by a blue line), move the red curser until the
It is possible to select the start and the end of the cineloop that should be saved. use to scroll through the sequence of images
should be saved.
last image in the sequence you want to store.
Double-click on the red marker (that will be surrounded by a blue line), move the red curser until the last image in the sequence you want to store.
Double-click on the red marker (that will be surrounded by a blue line), move the red curser until the
Double-click on the red marker (that will be surrounded by a blue
last image in the sequence you want to store.
line), move the red curser until the last image in the sequence you
last image in the sequence you want to store.
want to store.
It is possible to select the start and the end of the cineloop that s
Double-click on the red marker (that will be surrounded by a blu
16 |
2
Cineloop
cursor, scroll
through series of
previous images
1 Store Clip: Save the selected sequence
2 Store Image: Save selected image
Images and clips are saved on the hard-disk of the scanner.
1
9.2 Post-processing
In Freeze mode, all functions available in post-processing are
active.
Post-processing controls are available on cineloop images &
sequences as well as on stored images and sequences.
2
Adjust time length
of cineloop
from advanced
adjustments
menu in B mode;
10/20/30/40
seconds
1
Sorcha Stephe
Comment [30
S
S
freeze crop 2
C
C
fr
f