NEC Express5800 Series Installation Manual page 52

Chapter 1 Installing Operating System
The actual operation (e.g. mounting a disk) for partition is performed to the RAID device (md) which is
configured by software RAID.
Use [2 List Internal Disks] of ftdiskadm command to confirm hard disk drive information.
# ftdiskadm
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command: 2
[List Internal Disks]
Slot Name [use]
==============================================================================
1 sda(sdq) [3]
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 sdi(sdr) [3]
10
11
12
13
14
15
16
<Example of items>
Slot
Name
use
Information
path
52
(RAID1)
(RAID1)
(RAID1+0)
(RAID1+0)
Information (Vendor/Model/Serial)
AAA/BBB/#CCC
AAA/BBB/#DDD
-
-
-
-
-
-
-
Slot number used in ftdiskadm command (*1)
Device name (kernel device name)
"-" is displayed for hard disk drive that is not recognized by kernel.
Current mount count
Vendor name / model / serial number
SCSI path
Displayed as h<HOST number>c<CHANNEL number>t<TARGET number>l<LUN>.
Express5800/R320c-E4, R320c-M4 Installation Guide (Linux)
2. Setting up Red Hat Enterprise Linux 6 Server
path
h0c0t0l0
h1c0t0l0