NEC Express5800 Series Installation Manual page 31

Chapter 1 Installing Operating System
2. Setting up Red Hat Enterprise Linux 6 Server
Add a partition for the other drive by following the same steps.
Specify the same size as that of the previously added partition.
Verify that two RAID partitions are now created. Click [Create].
Select [RAID Device] and click [Create].
Configure mount point and file system type (select "swap" if it is a swap partition). Set the [RAID Level]
as "RAID1". Specify [RAID Members]. Click [OK].
Express5800/R320c-E4, R320c-M4 Installation Guide (Linux)
31