Download Print this page

Battery Replacement; Battery Safety Information - Fisher-Price W1910 Manual

Hide thumbs Also See for W1910:

Advertisement

Battery
Replacement
For best performance, we recommend
replacing the batteries that came with
this toy with three, new "C" (LR14)
alkaline batteries.
• Locate the battery compartment on the
bottom of the toy. Loosen the screws in
the door with a Phillips screwdriver and
remove it.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new "C" (LR14)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
then back on.
• When sounds, light or motion from this
toy become faint or stop, it's time for
an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Battery Safety
Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin yourproduct. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
5
1,5V x 3
"C" (LR14)

Advertisement

loading