Assembly - Bissell POWERLIFTER 1793 Series User Manual

Assembly

The only tool you will need to assemble
your vacuum is a Phillips screwdriver.
1 2
Slide handle down over Insert two screws and
body of vacuum. fasten using screwdriver.
4
Take the opposite
end of the hose and
open the foot base
door. Insert hose
end into foot and
push into place.
Once inserted
into the foot, hose
should be stretched
into the side and
upper hose clips.
6
Install Pet TurboEraser
Tool in front of
vacuum by inserting
end upward into
handle until "clicks".
3
Insert hose with elbow
end facing down and
align, locking tab with
slot. Rotate clockwise
until snapped into place.
5
Install extension
wand and crevice
tool in back of the
unit as shown.
7
To switch your filter,
remove the dirt
tank by pushing the
release button on
the tank handle and
lifting away.
www.BISSELL.ca
5