Table of Contents
Advertisement
To ensure your system is safe (see figure):
- ensure that an area of at least 50 cm in front of the
appliance is clear of objects which might hinder air
circulation (furniture, chairs, etc.);
- position a shelf at least 10 cm above the top of your
radiator;
- use mounting screws suitable for your wall.
≥
100
mm
IMPORTANT This radiator should never be installed with
the control unit positioned topside.
IMPORTANT The system must be fitted with an omni-
polar circuit-breaker with a minimum contact opening of
3mm.
ATTENTION
Always turn off the electricity supply (circuit-
breaker + pilot wire) before making any connections.
6
≥ 100 mm
≥ 100 mm
≥ 500 mm
2.2 Positioning your appliance
To get the most out of your appliance and enjoy the highest standards of
comfort, we recommend that you install the appliance near places with high heat loss
(windows, doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance's box.
2.3 Connecting the appliance
The technical specifications of your radiator are shown on its nameplate.
Please note these down before installing it and before requesting any after-
sales assistance.
ATTENTION NE PAS COUVRIR IP XX
XXXX–XXX–XXX
OF: XXXXXXXXXX XXXXXX
N CONSTRUCTEUR XXXXXX
When connecting the appliance to the mains, you must observe:
• the voltage indicated on the nameplate;
• conventional colour coding:
CONNECTING PRINCIPLE WITH PILOT WIRE (CLASS 2):
Your appliance is equipped with a pilot wire for connection to a pilot wire
programming base unit (not supplied with the appliance).
N (blue or grey)
L (brown)
Pilot wire (black)
Z23720
Z23720
IP: protection level of your appliance against the
ingress of solid foreign bodies and water spray
XXXXX
Voltage and power required for installation
230V ~ XXXXW
Appliance reference number
Class II: double insulated
OF: serial number
Manufacturer code
– blue or grey: neutral
– brown: live
– black: pilot wire
Neutral
Live
Pilot wire (base unit)
7
Advertisement
Table of Contents
