Troubleshooting - Wisco Industries 695D Manual

Food warming/merchandising cabinet
Hide thumbs Also See for 695D:
Table of Contents

Advertisement

TROUBLESHOOTING:

Unplug unit from power source, and allow to cool completely before performing any maintenance or cleaning.
Unit not working:
Check the power switch position, power cord, and/or electrical circuit.
Display light not working:
Tighten or replace the bulb.
Loud noise coming from the unit:
Check to see that blower motor is functioning properly
Unit not heating properly:
Has food been prepared in advance and placed in warmer at proper serving temperature?
Check heat settings. Is it at correct setting for your food product?
Turn unit on, open the door, and verify that hot air is being blown into unit. If not, your blower motor
may not be functioning properly.
If the air being blown in is not hot, then the thermostat may not be functioning properly.
If carousel is not turning: Drive motor may not be functioning or door switch may not be functioning
properly
NOTES:
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

695d-s

Table of Contents