Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AS MOTOR AS 420 E-ProClip
Summary of Contents for AS MOTOR AS 420 E-ProClip
- Page 1 Operator's Manual Mulching Mower AS 420 E-ProClip, AS 470 E-ProClip A From serial number: AS 420 E-ProClip: 035920010001, AS 470 E-ProClip A: 035820010001 Issued: 29 January 2020, V1.0 en-Translation of the Original Operator's Manual...
-
Page 2: Notes On The Operating Manual
dummy Intended use Notes on the operating manual The device is exclusively intended for mowing well maintained grassed lawn areas. Dear customer, Only use batteries and chargers authorised by Congratulations on your purchase. You have “AS-Motor Germany” and the engine manufac- acquired a reliable quality product by turer. -
Page 3: Table Of Contents
Contents Transport..........Notes on the operating manual..... Transporting the device......20 Contact ............ Transporting the battery......21 Device data..........Maintenance..........Intended use..........Maintenance overview......22 Cleaning the device......... 23 Explanation of the symbols....General inspection........23 Symbols in the instructions...... 4 Maintaining the engine...... -
Page 4: Explanation Of The Symbols
dummy Inhaltsverzeichnis Explanation of the symbols Warning Hazardous situation Symbols in the instructions Indicates a possibly hazardous situation In these operating instructions, the following with a medium level of risk that, if not symbols are used to denote special dangers. avoided, could result in minor or moderate injury. -
Page 5: Type Overview
Electric shock can cause serious apply. injury. Follow the safety instruc- tions for handling the battery Traction drive and the charger. AS 420 E-ProClip Do not expose the device to rain AS 470 E-ProClip A or humid environments. -
Page 6: Safety Instructions
Safe handling of the battery Safety instructions Observe the information in the operator’s Get informed! manual of the battery. Children cannot recognize the dangers caused For your safety, read these operating instruc- by the battery. tions carefully. Familiarize yourself with the control elements and the proper use of the –... - Page 7 Operationally safe condition Risk of injury due to damaged or defective battery The battery is in a safe operating condition when If the battery is damaged, liquid may leak. The liquid may cause skin irritation and burns. – the battery is undamaged. –...
-
Page 8: Safe Handling Of The Charger
Safe handling of the charger – Use the rear wall bracket to hang the char- ger. Observe the operator’s manual of the charger. – Do not unplug the power cord from the wall Children cannot recognize the dangers caused outlet by any means other than the power by the charger. -
Page 9: Check The Device Prior To Use
Risk of injury due to damaged or defective Danger area charger. A damaged or defective charger may smoke and cause injury or damage to property. – Pull the mains plug from the mains socket. During the charging process, the charger may overheat, catch fire and cause life-threatening injuries or major material damage if there is in- sufficient ventilation. -
Page 10: Use Caution During Operation
Use caution during operation Prior to mowing Danger of injury during motor start Personal protective measures The motor must not be started, During mowing, always wear – When other persons are in close proximity. safety shoes with good grip and long trousers. -
Page 11: Use Caution When Mowing
Use caution when mowing Have an authorised service centre check the device Risk of injury – when the blade has hit an object. Risk of injury caused by ejected objects. Never mow when persons, children, pets or material – if the device starts to vibrate unusually assets are in the danger area. -
Page 12: When Work Is Completed
If the device tilts or slips Use caution during maintenance – If you attempt to stop a device that is tilting and repair or slipping, severe injuries can result. If tilt- Only carry out work as described in these op- ing or sliding cannot be stopped in the be- erating instructions. -
Page 13: Device Description
Device description Illustration shows AS 470 E-ProClip A Cutting height adjustment (40 mm, 50 mm, 60 mm, 70 mm, 80 mm) Safety key Battery cover Type plate Guide bar with control elements Bar release Ventilation grid Cover Battery (not included) 10 Charger (not included) -
Page 14: Control Elements
Drive lever (3 - only for devices with drive) Control elements With the drive lever, you switch the drive on and off. I: Drive on: Pull the bar towards the handlebar. 0: Drive off: Release the bar. Height adjustment of handlebar 1. -
Page 15: Information On Mowing
Recommendations for mowing with Information on mowing mulching mowers: – Mow only 1/3 of the grass height. Prior to mowing, check the device for com- pleteness, proper function, and cleanliness. A – Do not set the brush height to the lowest po- dirty ventilation grid causes overheating of the sition. -
Page 16: Prior To Starting
Battery status Prior to starting Warning Charging the battery A damaged or defective battery may smoke The battery can be charged at any time. Inter- or catch on fire and cause life-threatening rupting the charging process will not damage injuries or major damage to property. the battery. -
Page 17: Checking The Battery's Charging Status
Checking the battery’s charging Inserting the battery status Open the battery cover (3). Insert the battery (9) in the battery com- partment until the compartment locks aud- ibly. Adjusting cutting height Adjust the cutting height setting only when the engine is switched off. Set the cutting height so that the blade does Press button (A) on the battery. -
Page 18: Starting
Automatic switch-off Starting The engine is equipped with an automatic switch-off to prevent overload. The automatic Danger switch-off is indicated by short, repeating sig- nal tones. Danger of electric shock from live cables on the mowing area. Live cables can be dam- –... -
Page 19: Driving (Devices With Drive)
Turning Driving (devices with drive) Turn the device round only where the grass Warning has been mowed already. Risk of injury due to tripping or slipping Turning round on an even surface: when pulling backwards and turning. 1. Switch off the drive. ►... -
Page 20: Switching Off And Parking
Switching off and parking Transport Transporting the device Warning On a slope, the device can roll away. Switch off the engine and wait until the blade stops before you lift the device. The device ► Put the device on even ground only or may only be lifted by two people. -
Page 21: Transporting The Battery
Maintenance Notice Risk of damage due to incorrect fastening of Warning straps. ► Fasten the straps only at the points Risk of injury due to unexpected movement. shown in the figure. When inspections are carried out, the device can move unexpectedly. ►... -
Page 22: Maintenance Overview
Maintenance overview Component Action Maintenance interval Device Check for safe working condition (basic inspection). ■ ▲ Clean. ■ Customer service. ▲ Battery Check battery for damage. ■ ▲ Safety key Check safety key for proper function. ■ ▲ Ventilation grid Clean. -
Page 23: Cleaning The Device
Cleaning the device General inspection To make sure that the device can be operated safely, check all nuts, bolts, screws etc. regu- larly for proper condition and firm seating. Check all electrical cables for damage. Immediately replace damaged or worn parts, especially covers, engine enclosure, battery cover, safety key and charger (authorised ser- vice centre). -
Page 24: Checking The Battery And The Charger
Checking the battery and the Checking the drive (devices with charger drive) 1. Put the device on a non-slip surface (e.g. Warning concrete or asphalt). A damaged or defective battery may smoke 2. Switch off the engine. or catch on fire and cause life-threatening 3. -
Page 25: Checking The Blade
Adjust the drive so that Check the blade and all fastening elements for wear, damage and cracks – the wheels are blocked when the drive is ac- tuated when the drive is pulled, – each time before and after you mow. –... -
Page 26: Checking Engine Brake
Blade change Checking engine brake Check the function of the engine brake by switching off the engine. The blade must come to a standstill from full speed within less than 3 seconds. Contact an authorised service centre if this is not the case. It is absolutely necessary to change the blade: –... -
Page 27: Assembly
Mounting guide bar and handlebar Assembly Scope of delivery The device is shipped in a carton. The scope of delivery includes: – The device. – The safety key. – This operating manual. – Manufacturer’s certificate. – Operator’s manual of the engine manufac- turer. -
Page 28: Storage
Longer storage Storage Thoroughly clean the device. Warning Touch up any possible damage to the paint finish (for paint, see Accessories). A damaged or defective battery may smoke Before longer storage, e.g. in the fall, have an or catch on fire and cause life-threatening authorised service centre check the device! injuries or major damage to property. -
Page 29: Spare Parts
Spare parts Disposal The reliable and safe operation of the device Lawn cuttings should not be thrown in the also depends on the quality of the spare parts trash, but should be composted. used. Only use original spare parts and ac- Shredded plant material decomposes quickly cessories approved by “AS-Motor Germany”. -
Page 30: Troubleshooting
Troubleshooting The following table contains the most frequent problems and their elimination. If more problems occur, contact the closest authorised service centre. You can find an authorised service centre on our home page www.as-motor.com. Problem Possible cause Remedy Engine does not start Engine brake bar is not Press the engine brake bar towards the pressed. - Page 31 Uneven cut, lawn be- Blade is dull or worn. Have blade resharpened and balanced comes unsightly by an authorised service centre. Re- place a damaged blade immediately. Speed is too high proportion- Reduce speed and/or select the correct ately to the cutting height. cutting height.
-
Page 32: Technical Specifications
Technical specifications Type AS 420 E-ProClip AS 470 E-ProClip A Range of application (temperature) 4 - 49 °C Observe the information of the engine manufacturer. Engine Type Electric engine Manufacturer Briggs & Stratton Type Series 82Li Maximum output / at speed 1,3 kW / 2700 min... -
Page 33: Accessories
Accessories Spray paint 400 ml, colour orange: G00011050 Clinometer: G06950027 Battery: G07300106 Charger: G07300107 Safety key: G07354024... -
Page 34: Declaration Of Conformity
AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.com Declaration of conformity We declare that the lawnmowers Type AS 420 E-ProClip AS 470 E-ProClip A Cutting width 42 cm 47 cm starting from serial no. 035920010001 035820010001... - Page 36 AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.com THE HIGH GRASS MOWER AND 2 STROKE ENGINE MANUFACTURE AS-Motor is your premium manufacturer for lawn and high grass mowers as well as 2 stroke en- gines. We offer our customers professional technology for steep slopes, rough terrain, and lawn care.
Need help?
Do you have a question about the AS 420 E-ProClip and is the answer not in the manual?
Questions and answers