Philips HQ7865/16 User Manual page 7

2
C
1
C
2
1
C
C
1
2
C
1 Switch the shaver off, remove the
powerplug from the socket and pull the
appliance plug out of the shaver.
2 Press the release button (1) to open the
shaving unit (2).
3 Turn the wheel anti-clockwise (1) and
remove the retaining frame (2).
4 Remove the shaving heads and place the
new ones in the shaving unit in such a way
that the parts with the small holes point
towards the centre of the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
5 Reassemble the shaving unit by replacing
the retaining frame. Press the wheel (1)
and turn it clockwise (2).
Replace damaged or worn shaving heads with
Philishave HQ6 Quadra shaving heads only.
Storing
Put the protection cap on the shaver to
prevent damage.
The appliance can be stored in the pouch
supplied.
ENGLISH
9