Advertisement
OPERATION
Display control
When powering on the freezer, the display window will light fully for 3
seconds, then it enters into normal display, the default set temperature
is -18°C. If no errors happen, the display panel shows set temperature or
mode, if it has error, error code will be displayed on control panel.
Locking and unlocking
• Locking: Long press temperature adjusting key
for 3s at the same time, it enters into lock status and display window
flashes for several seconds, then enters into normal display state.
• Unlocking: Long press temperature adjusting key
key
3s at the same time, it exits lock status and temperature can be
adjusted.
The following key operations shall be conducted under unlocking state. If
the operation is conducted under locking state, display quickly flashes for
3s as a tip of invalid operation.
Conversion of Fahrenheit and Celsius
Under unlocking state, Fahrenheit and Celsius shall be converted
through long pressing temperature adjusting key for 3s.
Temperature setting
In the mode of freezer, press the temperature adjusting key
change the set temperature, the set temperature will drop by 1°C/°F
for each press. When the display panel shows -24°C/-11°F, pressing
the temperature adjusting key
refrigerator and the display panel will show 1°C/34°F. In the mode of
refrigerator, the set temperature will increase by 1°C for each press of
adjusting key .
Temperature adjustment mode in Centigrade is as follows:
Temperature adjustment in Fahrenheit is as follows:
8
again will convert the freezer into
and quick freeze key
and quick freeze
to
Advertisement
