Table of Contents
Advertisement
English
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
•
Impairment of hearing.
•
Risk of personal injury due to flying particles.
•
Risk of burns due to accessories becoming hot
during operation.
•
Risk of personal injury due to prolonged use.
•
Risk of dust from hazardous substances.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D
WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.
WARNING: 120V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
technical data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle (DW801/DW803)
1 Flange set
1 Two pin spanner
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
6
Date Code Position (Fig. A)
The date code
is printed into the housing.
Example:
Description (Fig. A)
On/off switch
1
Spindle lock button
2
Guard
3
Side handle
4
Intended Use
Your DWE801/DWE810/DWE803 straight grinder has been
designed for professional grinding applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty angle grinders are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
WALT
e
this tool.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
; the
2
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
Attaching Side Handle (Fig. B)
DW801 DW803
Screw the side handle
either side of the gear case.
Mounting and Removing the Guard (Fig. C)
To Mount the Guard
1. Place the angle grinder on a table, spindle up.
2. Press the guard
3. Position the guard between your body and work piece.
5
, which also includes the year of manufacture,
2018 XX XX
Year of Manufacture
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
WARNING: Before using the tool, check that the handle is
tightened securely.
WARNING: The side handle should always be used to
maintain control of the tool at all times.
tightly into one of the holes
4
CAUTION: Guards must be used with this grinder.
down (Fig. C1).
3
on
6
Hide quick links:
Advertisement
Table of Contents
