Table of Contents
Advertisement
ANGLE GRINDERS
DW801, DW803, DW810
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
V
AC
Type
Power input
W
Frequency
Hz
No-load/rated
min
-1
speed
Wheel diameter mm
Grinding wheel
mm
thickness
Wheel type
Spindle diameter
Weight
kg
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury, read the
instruction manual.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WALT one of the
e
DW801-IN
DW803-IN
DW810-IN
220-240
220-240
15
15
850
1000
50/60
50/60
11000
12000
100
100
6
6
27
27
M10
M10
1.9
1.9
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
220-240
areas invite accidents.
b ) Do not operate power tools in explosive
15
atmospheres, such as in the presence of flammable
750
liquids, gases or dust. Power tools create sparks which
50/60
may ignite the dust or fumes.
11000
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
100
2) Electrical safety
6
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
27
plugs with earthed (grounded) power tools.
M10
Unmodified plugs and matching outlets will reduce risk of
electric shock.
1.84
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
English
3
Hide quick links:
Advertisement
Table of Contents
