ControlByWeb XW-110 User Manual page 43

XW-110™ WiFi Temperature Sensor Users Manual
The file can then be saved using the 'Save As...' option under the 'File' menu of the web browser. If the
TCP port has been changed (not port 80), the port will be required to read the file. For example, using
the default IP address, and port 8000, the log file would be read as follows:
http://192.168.1.2:8000/log.txt
The log.txt file may be erased with the following command:
http://192.168.1.2/log.txt?erase=1
After erasing the file, it might be necessary to refresh the page.
Note: If the Control Password is enabled in the setup pages, the password will be required to access the
log file.
Xytronix Research & Design, Inc.
Log File (XW-110 Plus)
Page 43