ControlByWeb XW-110 User Manual page 22

Web Server
3.3 Email Tab
When configured as a Stand-Alone device this tab is visible. When temperature alarms occur and an
email option is enabled, an email is sent. This page is used to configure the email settings for up to three
email addresses. The same message is sent to each email address. For email notification to work, the
XW-110 must have a properly configured network connection and a SMTP server must be defined.
Emails only work if the XW-110 is connected to an access point and can send messages on the internet.
The XW-110 Plus contains additional settings than the XW-110. If you have the XW-
STATUS NOTIFICATION
Email on Low Battery
When the estimated battery life reaches 15%, an email alert is sent. To conserve already meager energy
resources, only one low battery message is sent until the estimated battery life goes above 50%.
Weekly Status Email
When checked, the XW-110 will send an email at least once a week with temperature and battery
information. This is to assure the user the unit is functioning properly. The weekly emails are sent 7-days
from the last email that was successfully sent, including alarm or low battery emails. If you are receiving
regular email alerts, the weekly email may never be sent.
Page 22
(STAND-ALONE MODE ONLY)
110, your screen may differ slightly.
XW-110™ WiFi Temperature Sensor Users Manual
Xytronix Research & Design, Inc.