Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 121216
28
75 Ton Shop Press
(Pneumatic/Hydraulic)
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
03696
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SIP 03696
Summary of Contents for SIP 03696
- Page 1 (Pneumatic/Hydraulic) environment, take the packaging to the local amenity tip and place into the appropriate recycling bin. FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: 03696 TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com www.sip-group.com Please read and fully understand the instructions in this manual before operation.
- Page 2 LE12 9NH England As the manufacturer's authorised representative within the EC declare that the 75 Ton Shop Press (Pneumatic/Hydraulic) - SIP Part No. 03696 Conforms to the requirements of the following directive(s), as indicated. 2006/42/EC Machinery Directive And the relevant standard(s), including:...
-
Page 3: Table Of Contents
NOTES CONTENTS Page No. Description Safety Symbols Used Throughout This Manual Safety Instructions Guarantee Contents and Accessories Technical Specifications Getting to Know Your Shop press Assembly Instructions Operating Instructions Maintenance Troubleshooting Exploded drawing - Main Parts List - Main Exploded Drawing - Pump Parts List - Pump Exploded Drawing - Ram Parts List - Ram... -
Page 4: Safety Symbols Used Throughout This Manual
SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL NOTES Danger / Caution: Indicates risk of personal injury and/or the possibility of damage. Note: Supplementary information. SAFETY INSTRUCTIONS IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the Shop press. - Page 5 NOTES SAFETY INSTRUCTIONS….cont WARNING! Only operate on a level and stable surface and never use on soft ground where the Shop press is likely to “sink” whilst in operation. Ensure that the shop press is securely bolted to the ground before putting into service. NEVER STAND ON THE SHOP PRESS: The Shop press is not designed for this purpose.
-
Page 6: Guarantee
GUARANTEE This SIP Shop press is covered by a 12 month parts and labour warranty covering fail- ure due to manufacturers defects. This does not cover failure due to misuse or operat- ing the Shop press outside the scope of this manual - any claims deemed to be out- side the scope of the warranty may be subject to charges Including, but not limited to parts, labour and carriage costs. -
Page 7: Contents And Accessories
EXPLODED DRAWING - RAM CONTENTS & ACCESSORIES 1. Arbor plate x2 5. Air Pedal 2. Leg / Leg Supports x2 (c/w Fixings) 6. Bed Pin x4 inc. Clips x8 3. Manometer N/A. Frame (c/w ram/winch/pump/bed) 4. Pump Handle N/A. Instruction Manual Note: If any of the above are missing or damaged, contact your distributor immediately. -
Page 8: Technical Specifications
TECHNICAL SPECIFICATIONS PARTS LIST - PUMP Ref. No. Description Ref. No. Description breath screw P30. copper washer oil tank P31. o ring connector P32. hand pump core lock washer P33. u ring screw P34. o ring steel ball P35. washer spring P36. -
Page 9: Getting To Know Your Shop Press
EXPLODED DRAWING - PUMP GETTING TO KNOW YOUR SHOP PRESS Ref. No Description Ref. No Description Manometer (gauge) Leg Supports Air Vent / Oil Filler Screw Bed Pin Hydraulic Pump Release Valve Bed Winch Air Motor Arbor Plate Pump Handle Hydraulic Ram Air Pedal (Valve) -
Page 10: Assembly Instructions
ASSEMBLY INSTRUCTIONS PARTS LIST - MAIN….cont Ref. No. Description Ref. No. Description Caution: Due to the weight of the shop press; Correct lifting equipment should be used during assembly. air inlet hose handle grip plug steel cable FITTING THE LEGS air valve steel cable Connect the leg (1) to either the left or right post by using the bolts (2), washers (6),... -
Page 11: Parts List - Main
PARTS LIST - MAIN ASSEMBLY INSTRUCTIONS….cont Ref. No. Description Ref. No. Description Note: Ensure that the gauge is tight against the fitting so that it will not leak oil from the connection. foot bolt working table support bar steel block screw Gauge Fitting lock washer... - Page 12 ASSEMBLY INSTRUCTIONS….cont EXPLODED DIAGRAM - MAIN Note: Take care when removing the transit bungs as there is oil in the sys- tem that could leak if the hose is not handled carefully. Air Fitting Remove the nut from the air fitting on top of the pump. Locate the air pipe from the ram unit.
- Page 13 TROUBLESHOOTING ASSEMBLY INSTRUCTIONS….cont FITTING THE WINCH The following form lists the common operating issues with problems and solutions. Please read the form carefully and follow it. If any of the following symptoms occurs during your operation, stop using the Shop press immediately, or serious personal injury could result.
- Page 14 OPERATING INSTRUCTIONS MAINTENANCE Place the bed to your desired height; Turn the winch clockwise to raise the bed Periodically check the press frame to make sure all bolts are tight and inspect and anti clockwise to lower. for cracked welds, bent, loose, or missing parts. Use the bed support pin (x4) and bed support pin clips (x8) to secure in place.
Need help?
Do you have a question about the 03696 and is the answer not in the manual?
Questions and answers