Table of Contents
Advertisement
Quick Links
1/2" Reversible
Please dispose of packaging for the product in a responsible
manner. It is suitable
for recycling.
Help to protect the
Air Ratchet Wrench
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR
SIP DIRECTLY ON:
TEL: 01509500400
06725
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference
Ref: 180913
16
1
Advertisement
Table of Contents
Related Manuals for SIP 06725
Summary of Contents for SIP 06725
- Page 1 FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: TEL: 01509500400 06725 EMAIL: sales@sip-group.com or technical@sip-group.com www.sip-group.com Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference...
-
Page 2: Declaration Of Conformity
1/2” Air Ratchet Wrench - SIP Part. No. 06725 Conforms to the requirements of the following directive(s), as indicated. 2006/42/EC Machinery Directive And the relevant harmonised standard(s) Signed: …………………………………... Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd Date: 06/01/2013. - Page 3 PARTS LIST CONTENTS Ref No. Description SIP Part No. Ref No. Description SIP Part No. Valve Plug AI05-00181 Front Plate AI05-00196 O-ring 9.5×2 AI05-00182 Bearing AI05-00197 Spring AI05-00183 V Washer AI05-00198 O-ring 4×1.8 AI05-00184 Thread Ring Gear AI05-00199 Valve Stem...
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS PARTS LIST IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the ratchet wrench. When using your ratchet wrench, basic safety precautions should always be followed to reduce the risk of personal injury and / or damage to the ratchet wrench. -
Page 5: Troubleshooting
TROUBLESHOOTING SAFETY INSTRUCTIONS….cont ulators, hoses, isolation valves and connection devices MUST be suitable for the in- The following form lists the common operating issues with problems and solutions. tended application correctly installed and maintained in good condition by a com- Please read the form carefully and follow it. -
Page 6: Maintenance
SAFETY INSTRUCTIONS….cont MAINTENANCE Disconnect the air tool from the air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts. We recommend wearing a face mask or respiratory equipment when Use genuine parts only. Non-authorised parts may be dangerous and will using any air tool;... - Page 7 OPERATING INSTRUCTIONS….cont GETTING TO KNOW YOUR RATCHET WRENCH LUBRICATION An automatic in-line filter-regulator-lubricator is recommended (Fig.1) as it in- creases tool life and keeps the tool in sustained operation. The in-line lubricator should be regularly checked and filled with air tool oil. Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to the exhaust ports and holding the throttle open approximately 30 seconds.
-
Page 8: Technical Specifications
Guarantee: This SIP air ratchet wrench is covered by a 12 month parts and labour warranty cover- ing failure due to manufacturers defects. This does not cover failure due to misuse or...
Need help?
Do you have a question about the 06725 and is the answer not in the manual?
Questions and answers