Download Print this page

Advertisement

Quick Links

ROCKCOCO
MANUAL
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 1
15/12/14 10:34

Advertisement

loading

Summary of Contents for fatboy ROCKCOCO

  • Page 1 ROCKCOCO MANUAL RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 1 15/12/14 10:34...
  • Page 2 HANG IN THERE ROCKCOCO RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 2 15/12/14 10:34...
  • Page 3 GLAMOUR MEETS ROCK ’N ROLL Looking for a touch of Louis XV glamour mixed with some dirty rock`n’roll, Dutch designers DeMakersVan created this urban but durable chandelier with iconic Fatboy wiring. FIRST OF ALL... Check the contents of the box. Note! In case of missing or damaged parts, please contact the sales crew.
  • Page 4 STEP 1 STEP 2 STEP 3 Click mounting plate in corresponding clicker in large Position construction ring with the upper side on the top Take arm no.1 of the 5 large arms and slide it into one of the arm.
  • Page 5 Repeat step 4 and 5 for the other 3 large arms and put the ring until it is pushed all the way through. RockCoco on a flat surface. Enjoy your halfway result for a moment! To click large arm no. 2 on the mounting plate it might be necessary to bend the arm a bit.
  • Page 6 STEP 7 STEP 8 STEP 9 Take arm no. 1 of the 5 small arms and slide it into one of Repeat step 7 for the other 4 small arms and wipe the sweat Position the cable house with Led strings in the middle of the corresponding inner holes of the construction ring until from your forehead if necessary...
  • Page 7: Step 12 (Final Step)

    STEP 10 STEP 11 STEP 12 (FINAL STEP) Position the shorter Led-cables in the small arms and start Position the longer Led-cables in the large arms and start After removing the protective foams from the lights, clicking the cable from the Led module.
  • Page 8 NOW START ASSEMBLY FOR INDOOR OR OUTDOOR USE INTRODUCTION Caution! Follow the step-by-step instructions as described for your own safety and to avoid problems with connecting the Fatboy Ceiling kit and Fatboy Rockcoco to your home grid. Used tools Voltage-tester screwdriver Crosshead screwdriver Stripping pliers Electrician’s pliers...
  • Page 9 INDOOR ASSEMBLY RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 9 15/12/14 10:35...
  • Page 10 Be sure your home grid provides the required voltage, frequency and grounding: 230 - 240 VAC / 50 - 60 Hz / Earthed sign. Caution! Do not install the RockCoco Ceiling kit in case of any doubts. Please contact the sales outlet or an electrician. STEP 2 Warning! To avoid any chance of an electric shock, switch off the current in the meter cupboard.
  • Page 11 Note! Due to the Rockcoco’s weight (7 kg), it is required Wooden joists: always to mount the Fatboy Ceiling kit onto a concrete or Rough-drill with a wood drill bit (ø 6 mm) the 4 holes.
  • Page 12 Mount the wire. Make sure the cable clamp will fit inside the cap later on. you can dim the Rockcoco ánd turn it on and off by solely using the buttons on the remote. use your light switch to turn the Rockcoco on or off.
  • Page 13 Place transformer by sliding it in the holder. Connect the cable with screw terminal to the Roll up your cable untill the RockCoco has the perfect transformer. Click it on and screw tight. height. Gently place the cable around the ceiling kit along with the leftover wire.
  • Page 14 (included). secured tightly. functioning of the Rockcoco. Rockcoco does not light up? Check all the connections. Contact the sales outlet in case the Rockcoco does not work. Rockcoco does light up? Congratulations and enjoy your indoor Rockcoco! RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 14...
  • Page 15 OUTDOOR ASSEMBLY RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 15 15/12/14 10:35...
  • Page 16 Be sure your grid provides the required voltage, frequency and grounding: 230 - 240 VAC / 50 - 60 Hz / Earthed sign. Caution! Do not install the RockCoco in case of any doubts. Please contact the sales outlet or an electrician. STEP 2...
  • Page 17 RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 17 15/12/14 10:35...
  • Page 18 ROCKCOCO REMOTE Unscrew to change battery. Make sure to point the remote in the direction of the lamp and hold buttons to dim the light. Press once + = on Press once - = off RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 18...
  • Page 19: General Use

    GENERAL USE AND CONDITIONS RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 19 15/12/14 10:35...
  • Page 20 WARRANTY INFORMARTION Visit our website www.fatboy.com for information on warranty on your product. Fatboy cannot accept any claim on warranty in event of: Damage or defects caused by use, operation or treatment of the product in ways that are inconsistent with normal personal or domestic use; repairs or attempts to repair undertaken by any party other than Fatboy the original B.V.
  • Page 21: Troubleshooting

    If the cable is damaged contact your Fatboy dealer to replace the cable. The lamp has fallen and is damaged • If the lamp no longer works it is unsuitable for use. In that case please contact your Fatboy dealer. IMPORTANT! Please contact Fatboy or your Fatboy dealer if your problem has not been solved or you have any other problems.
  • Page 22: Technical Specifications

    TECHNICAL SPECIFICATIONS Model: Rockcoco Primary rating: 100-240V AC, 50/60Hz, 0.5A Secondary rating: 5,5V DC, 2,8A Power: 14W (maximum use) Safety class: Class II Light source: Non-replaceable LED, 10 x Honglitronic low capacity LED (1W) Control source: RF (radiofrequency) remote control, cell type battery 27A...
  • Page 23 RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 23 15/12/14 10:35...
  • Page 24 RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 24 15/12/14 10:35...