Storage - Philips 8150XL/43 User Manual

ENGLISH
20
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, model RC1776, or
rubbing alcohol) and lubricated with Norelco
Razor Lubricant, model AL80, or one drop of
mineral oil (in the center of the head). This helps
prevent wear of the shaving heads.
After Each Use: Trimmer
Turn razor OFF.
1
Push down spring-release trimmer switch.
2
C
Clean trimmer with the brush every time
3
you use it.
C
Lubricate the trimmer teeth with Norelco
4
Razor Lubricant (model AL80) or with one
drop of mineral oil every 6 months.
Close trimmer by pressing trimmer down.
5
This razor has no other user-serviceable parts.
Any other service should be performed by an
Authorized Norelco Service Location.

Storage

C
The razor can be placed in the charging stand
for safe storage. If storing razor in stand,
remove the plug from outlet as soon as the
razor is fully charged.
Be sure razor is turned off. Remove cord from
outlet and razor or charging stand before
storing in a safe, dry location where it will not
be crushed, banged, or subject to damage.
Do not wrap cord around razor or charging
stand when storing.
Store cord in a safe location where it will not
be cut or damaged.
Do not keep razor or charging stand
permanently plugged into outlet.
Do not place or store razor or charging stand
where it can fall or be pulled into a tub or
sink, water or other liquid while plugged in.
C
Put the Protective Razor Head Cap on razor
to protect heads.
ENGLISH
21