Wired Remote Control Installation; Electrical Wiring; How To Insert Batteries - LG L5UC728FA0 Installation Manual

Installation of Indoor, Outdoor Unit
n WIRED REMOTE CONTROL INSTALLATION
DISASSEMBLING
Front case
Lever carefully
the box open
using a screw
driver, etc.
• Fix the under plate on the wall
Face of wall
Under plate
Screw (accessory)

ELECTRICAL WIRING

(Main board)
n Remote Control Preparation(OPTIONAL)
HOW TO MOUNT ONTO A WALL

HOW TO INSERT BATTERIES

Remove the battery cover from the remote
controller.
• Slide the cover according to the arrow
direction.
Insert the two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
Re-attach the cover.
• Slide it back into position.
24 Multi Type Air Conditioner
Remote control
box body
CN REMO
Wire and make sure that teminal
numbers are matched on unit side and
remote controller side.
The maximum length of the cord is 100m.
If the length of the cord exceeds 50m,
use a wire size greater than 0.5mm
• Separate the under plate from Remote control box.
• Fix the cord clamps on the wall by
ø 3 tapping screws (accessory).
• Fix the remote control cord.
Remote controller
2
.
• Do not use rechargeable
batteries, such batteries differ
from standard dry cells in
shape, dimensions, and
performance.
• Romove the batteries from
the remote controller if the air
conditioner is not going to be
used for some long time.
Cord clamp
(accessory)