Indoor unit installation
1. Route the indoor tubing and the drain hose in
the direction of rear left or right
2. Tape the tubing, drain hose and the
connecting cable. Be sure that the drain hose
is located at the lowest side of the bundle.
Locating at the upper side can cause drain
pan to overflow inside the unit.
CAUTION: If the drain hose is routed inside the room, insulate the hose with
an insulation material* so that dripping from "sweating"(condensation) will
not damage furniture or floors.
*Foamed polyethylene or equivalent is recommended.
Wall Mounted Type
Installation of Indoor, Outdoor Unit
Drain hose
Loop
Gas side
Connecting
piping
cable
Liquid side
Drain hose
piping
Installation Manual 11