Remote Controller Installation - LG L5UC728FA0 Installation Manual

• The following parts is option.
Hanging Bolt
Nut
Spring Washer
Plate Washer
CAUTION: Tighten the nut and
bolt to prevent unit falling.
n Remote Controller Installation
• Although the room temperature sensor is in the indoor unit, the remote controller should
be installed in such places away from direct sunlight and high humidity.
Installation of the remote controller
• Select places that are not splashed with water.
• Select control position after receiving customer approval.
• The room temperature sensor is built in the indoor unit.
• This remote controller equipped with liquid crystal display. If this position is higher or lower,
display is difficult to see.(The standard height is 1.2 ~ 1.5m high)
Routing of the remote controller cord
• Keep the remote controller cord away from the refrigerant piping and the drain piping.
• To protect the remote controller cord from electrical noise, place the cord at least 5cm away
from other power cables (audio equipment, television set, etc.)
• If the remote controller cord is secured to the wall, provide a trap at the top of the cord to
prevent water droplets from running.
- W 3/8 or M10
- W 3/8 or M10
- M10
- M10
Installation of Indoor, Outdoor Unit
• Drill the piping hole on the wall slightly tilted to the
outdoor side using a Ø 70 hole-core drill.
Wall
Indoor Outdoor
Installation Manual 23