Case Cool; Case Medium / Warm - LG 32LN540B-CN Service Manual

LG Electronics Inc. Display Division
Establish : 12/09/15
Reform : 12/09/15
If internal pattern is not available, use RF input. In EZ Adj. menu
9. White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner (ON).
By selecting OFF, you can adjust using RF signal in 206 Gray pattern.

CASE Cool

First adjust the coordinate far away from the target value(x, y).
1. x, y target
) Decrease the R, G.
2. x, y target
) First decrease the B gain,
) Decrease the one of the others.
3. x target, y target
) First decrease B, so make y a little more than the target.
) Adjust x value by decreasing the R
4. x target, y target
) First decrease B, so make x a little more than the target.
) Adjust x value by decreasing the G
How to adjust
1. If G gain is adjusted over 172 and R gain and B gain less than 192, Adjust is O.K.
2. If G gain is less than 172, increase G gain by up to 172, and then increase R gain and B gain same amount of
increasing G gain.
3. If R gain or B gain is over 255, Readjust G gain less than 172, Conform to R gain is 255 or B gain is 255

CASE Medium / Warm

First adjust the coordinate far away from the target value(x, y).
1. x, y target
) Decrease the R, G.
2. x, y target
) First decrease the B gain,
) Decrease the one of the others.
3. x target, y target
) First decrease B, so make y a little more than the target.
) Adjust x value by decreasing the R
4. x target, y target
) First decrease B, so make x a little more than the target.
) Adjust x value by decreasing the G
After You finish all adjustments, Press In-start button and compare Tool option and Area option value
with its BOM, if it is correctly same then unplug the AC cable.
If it is not same, then correct it same with BOM and unplug AC cable.
For correct it to the model s module from factory JIG model.
Push the IN-STOP KEY after completing the function inspection.
LC36B Adjust specification
14/25
LG(55)C2-0661-00
L G e l e c t r o n i c s