Smart Summon - Tesla MODEL S Operating Manual

Hide thumbs Also See for MODEL S:
Table of Contents

Advertisement

Smart Summon (if equipped) is designed to
allow you to move Model S to your location
(using your phone's GPS as a target
destination) or to a location of your choice,
maneuvering around and stopping for objects
as necessary. Smart Summon works with the
Tesla mobile app when your phone is located
within approximately 213 feet (65 meters) of
Model S. Using ultrasonic sensors, cameras,
and GPS data, Smart Summon maneuvers
Model S out of parking spaces and around
corners. This is useful for moving Model S out
of a tight parking spot, through puddles, or
helping you retrieve your car while carrying
packages. You must maintain a clear line of
sight between you and Model S and closely
monitor the vehicle and its surroundings at all
times.
Warning: Smart Summon is designed and
intended for use only on parking lots and
driveways located on private property
where the surrounding area is familiar and
predictable. Do not use Smart Summon
on public roads.
Warning: Smart Summon must only be
used on paved surfaces.
Warning: Smart Summon is a BETA
feature. You must continually monitor the
vehicle and its surroundings and stay
prepared to take immediate action at any
time. It is the driver's responsibility to use
Smart Summon safely, responsibly, and as
intended.
Warning: Smart Summon may not stop
for all objects (especially very low objects
such as some curbs, or very high objects
such as a shelf) and may not react to all
traffic. Smart Summon does not
recognize the direction of traffic, does not
navigate around empty parking spaces,
and may not anticipate crossing traffic.
Warning: Smart Summon's performance
depends on the ultrasonic sensors, the
visibility of the cameras, and the
availability of an adequate cellular signal
and GPS data.
Warning: When using Smart Summon,
you must maintain a clear line of sight
between you and Model S and stay
prepared to stop the vehicle at any time
by releasing the button on the mobile
app.
Autopilot

Smart Summon

Before Using Smart Summon
Download the latest version of the Tesla
mobile app to your phone, and ensure
your phone has cellular service and GPS
enabled.
Your phone must be connected to Model S
and located within approximately 213 feet
(65 meters).
The vehicle's Autopilot cameras must be
fully calibrated (see
Cameras
on page 86).
You must have a clear line of sight to
Model S.
Model S must be in Park, not charging,
and all doors and trunks must be closed.
Using Smart Summon
1.
Open the Tesla mobile app, and press
SUMMON.
2.
Press the Smart Summon icon located in
the center of the image of your Model S. It
may take several seconds for Smart
Summon to start up.
Note: You can use Standby Mode to
eliminate the delay that occurs when
Smart Summon is starting up (see
Standby Mode
on page 108).
The mobile app displays a map with a blue
circle, which represents the maximum
proximity of 213 feet (65 meters) that you
must maintain between your phone and
Model S. The blue dot on the map
represents your location, and the red
arrow represents the location of Model S.
3.
Position yourself anywhere within the blue
circle where you have a clear line of sight
to Model S.
4.
You can now operate Smart Summon
using either of these modes:
COME TO ME mode: Press and hold
the COME TO ME button. Model S
moves to your GPS location. As you
move, Model S follows you. When
Model S reaches you, it stops and
shifts into park.
Drive to Calibrate
107

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents