Lindy 42341 User Manual page 3

User Manual
Introduction
Thank you for purchasing from the Lindy Cable KVM Switch range. This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
Package Contents
▪
KVM Switch with cables
▪
This Manual
Specification
▪
USB 2.0 compliant, supports USB 2.0 hubs and device sharing
▪
Port switching via button, software and keyboard hotkey switching
▪
2 System Cables connected to the switch
42341: Interfaces: DVI, USB 2.0, Audio out & Microphone
DVI-D Single Link: up to 1920x1200, HDCP compliant – not for connection to HDMI ports of graphic
cards or PC/notebook, HDMI and Deep Colour are not supported!
42342: Interfaces: VGA, USB 2.0, Audio out & Microphone
42344: Interfaces: DisplayPort 1.2, USB 2.0, Audio out & Microphone
Supports resolutions up to 3840x2160 60Hz 4:4:4 8bit
42345: Interfaces: HDMI 2.0, USB 2.0, Audio out & Microphone
Supports resolutions up to 3840x2160 60Hz 4:4:4 8bit
Installation
1. Install the driver software. This is located at Lindy.com
2. To install on Mac OS, copy the file (*.pkg format) to the local hard disk and install it from there.
3. This will install the software on your computer and create some new icons in the Windows taskbar or
in the Mac Dock. They will look like one of the icons shown below.
4.
No live connection or KVM switch detected
Port 1computer is displayed and selected
Port 2 computer is displayed and selected
5. Connect your keyboard, mouse, monitor and audio devices to the KVM switch.
6. If required, you may use a USB hub to connect more than 2 USB devices, to do this please use a
self-powered USB hub.
7. Connect the system cables directly to your computers. Extension or adapter cables may NOT be
supported at high video resolutions.
English