OC_RT1: OC Retry Jumper
When you short this jumper, the system will keep retrying OC items until it boot up
successfully.
OC_FS1: OC Force Enter BIOS Jumper
When you short this jumper, the system will be forced access to the BIOS and skip OC
failure messages .
OC_FS1
OC_RT1
JSLOW1: Slow Mode Booting Jumper
This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
⚠
Important
Users will try extreme low temperature overclocking at their own risks. The
∙
overclocking results will vary according to the CPU version.
∙
Please don't switch to Enabled when power-off or the system will be un-bootable.
30
Overview of Components
OC_RT1
Normal
(default)
OC_FS1
Normal
(default)
Normal
(default)
Keep retrying OC
Force access to the
BIOS and skip OC failure
messages
Enabled
(Please enable this jumper
during BIOS POST.)