Cpu Socket - MSI Creator X299 Quick Start Manual

CPU Socket

Introduction to the LGA 2066 CPU
The surface of the LGA 2066 CPU has four notches
and a golden triangle to assist in correctly lining
up the CPU for motherboard placement. The
golden triangle is the Pin 1 indicator.
⚠
Important
∙ Always unplug the power cord from the power outlet before installing or removing
the CPU.
Please retain the CPU protective cap after installing the processor. MSI will deal
∙
with Return Merchandise Authorization (RMA) requests if only the motherboard comes
with the protective cap on the CPU socket.
∙ When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
∙
your system.
Overheating can seriously damage the CPU and motherboard. Always make sure
∙
the cooling fans work properly to protect the CPU from overheating. Be sure to apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Whenever the CPU is not installed, always protect the CPU socket pins by covering
∙
the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the
∙
documentation in the heatsink/ cooler package for more details about installation.
∙ This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI
operation beyond product specifications.
16
Overview of Components
does not guarantee the damages or risks caused by inadequate
®
Distance from the center
of the CPU to the nearest
DIMM slot.
59.02 mm 59.02 mm